Passpoint / Hotspot 2.0

On Cisco Meraki MR, Passpoint is configured as Hotspot 2.0.

Only Manual config mode is supported. For multiple locations environments, API support can be added

Setting	Value
SSID status	Enabled
SSID (name)	Set a name according to your set-up
Security	Enterprise with “my Radius server”
Splash page	None
Client IP and VLAN	As preffered, per your network config

Under RADIUS, click Add server and add two entries:

#	Host	Auth Port	Secret
1	`<RADIUS_SERVER_1>`	1812	`<RADIUS_SHARED_SECRET>`
2	`<RADIUS_SERVER_2>`	1812	`<RADIUS_SHARED_SECRET>`

Under RADIUS accounting, click Add server and add two entries:

#	Host	Accounting Port	Secret
1	`<RADIUS_SERVER_1>`	1813	`<RADIUS_SHARED_SECRET>`
2	`<RADIUS_SERVER_2>`	1813	`<RADIUS_SHARED_SECRET>`

Set Accounting interim interval to 2 minutes.

If the Advanced RADIUS settings section is present, configure:

Setting	Value
Called-Station-ID	AP MAC address (remove any others)
NAS ID	remove any others
Server timeout	5 seconds
Retry count	3

Click Save Changes.

Navigate to Wireless → Hotspot 2.0 and from SSID dropdown select previously create SSID name

Domain List, Roaming Consortium, NAI realms are design specific - Ask Wiacom before for details

Setting	Value
Hotspot 2.0	Enabled
Operator name	Wiacom
Venue name	`Your venue name`
Venue type	Unspecified (unless specified )
Network type	Free public network (unless specified )
Domain list	`<Ask Wiacom>`
Roaming Consotium OIs	`<Ask Wiacom>`
NAI Realms	`<Ask Wiacom>`
MCC/MNCs	Leave empty

Click Save Changes.